Tenor DX for Service Providers
• SelectNet™ AutoSwitching
• Intelligent Call Routing
• Integrated H.323 gateway and gatekeeper
• SIP User Agent
• From 8 to 120 VoIP channels
• Available with 2, 4, 6 or 8 T1/E1/PRI Spans
• IVR/Radius AAA Compliant (Multi-lingual IVR)
• Available in MultiPath or Gateway Configurations
The Quintum® Tenor® DX MultiPath Switch offers enterprises
an easy, cost-effective way to capitalize on the power
of Voice over IP (VoIP). The Tenor integrates a gateway,
a gatekeeper, intelligent call routing, and supports
H.323, SIP and QoS all in one solution.
Enterprises can benefit from a variety of valuable
applications such as PBX extension, remote office
connectivity, long distance consolidation and call
centers. Product scales from a fractional T1/E1, with
8 simultaneous VoIP channels up to a full 8 span MultiPath
switch supporting 120 simultaneous VoIP calls.
Patented SelectNet™ Technology assures high quality
voice.
The Tenor employs its patented SelectNet™ Technology
to monitor calls for jitter, packet loss, and latency,
and can transparently switch mid-call to the voice
network whenever conditions demand.
More intelligence means greater flexibility.
With its MultiPath Call Routing, the Tenor can
intelligently route calls between the PBX, the PSTN,
and the IP network to achieve the best combination
of cost and quality. The Tenor can also route calls
over IP to reduce costs, and then transparently "hop
off" to the PSTN, to reach off-net locations.
No other VoIP solution can match this flexibility.
More intelligence means easier installation.
With its MultiPath architecture, the Tenor is
the only VoIP solution that can be installed without
upgrades to the existing voice or data networks. Tenor
connects to the data network through a 10/100 Ethernet
interface, and to the enterprise and public voice
network through a T1, E1, or PRI interface.
More intelligence means greater reliability.
The Tenor is designed to pass calls through to
the existing voice network in the event of system
malfunction – even a total power failure.
More intelligence means less network congestion.
With its PacketSaver™ Technology, the Tenor reduces
bandwidth consumption up to 57%, by combining voice
packets from several calls into a single packet to
minimize bandwidth requirements.
NATAccess™ intelligence means greater security.
The Tenor VoIP MultiPath Switch also features
a unique technology that allows it to operate behind
NAT-enabled firewalls. The innovative NATAccess™ solution
overcomes the problem of NAT firewalls not correctly
translating internal IP addresses into public addresses
when a VoIP call is established with an outside party.
For pricing information for Quintum products and
hardware installation, please contact us or email
sales@ipsmarx.com.
Click here to view Cisco
Gateways compatible with IPsmarx solutions.
Tenor DX for Service Providers